Sunday, December 3, 2023
HomeHow ToReboot and select proper boot device error

Reboot and select proper boot device error

If you are experiencing boot device errors, you may be wondering what to do. In this blog post, we will provide you with a simple fix for these errors and show you how to Reboot and select proper boot device error if needed. We will also provide you with a list of boot device errors and the corresponding fixes for each one. By following these steps, you can resolve most boot device errors on your own computer.

What is a Reboot?

Rebooting your computer is a necessary step to fixing many issues. Rebooting can fix problems with the operating system, programs, files, and hardware. Reboots can also help clear out temporary data and clean up your PC.

Windows typically checks to see if a reboot is needed when you encounter an error message that says “Reboot and select proper boot device.” If you experience this error message often, try rebooting your computer to fix the problem.

How to Reboot Your PC

1. If your PC is having trouble booting, you may be experience a boot device error. This guide will show you how to reboot your PC and select the proper boot device for Windows.
2. To reboot your PC, first close all programs that are open. Next, press the power button to turn off your PC. After it has shut down, wait 10 seconds and then restart it by pressing the power button again.
3. When your PC starts up, go to the Windows logo screen (or the login screen if you’re not signed in) and type “bootmgr” into the search box. Once it appears in the results, right-click on it and select “Run as administrator” from the pop-up menu.
4. Next, click on the “Windows Boot Manager” tab and make sure that “Normal” is selected as the default boot device. Click on OK to save your changes and exit bootmgr.
5. Now start up your favorite program to check whether your computer can now load Windows normally or not.

What are the Different Types of Boot Devices?

There are different types of boot devices in a computer system. The first type is the hard drive, which is the most common type. The second type is the CD or DVD drive, which is used to boot from a diskette or an optical media. The third type is the network card, which can be used to boot from a network location.

How to Fix a Boot Device Error in Windows 10, 7

When you get a “boot device error” on your computer, it usually means that the boot sector on your hard drive is corrupt. The best way to fix this problem is to reboot your computer and select the proper boot device from the available options. Here’s how to do it:

1. Restart your computer and wait until it gets to the Windows logo screen.
2. When the Windows logo screen appears, press the F12 key to open the boot menu.
3. In the boot menu, choose “Safe Mode with Networking.”
4. Once in safe mode, use a tool like Microsoft Fix-It or Bootrec to scan for and repair any corrupted files on your hard drive. (If you don’t have a copy of Microsoft Fix-It or Bootrec handy, you can them from Microsoft website.)
5. Once you’ve fixed any corrupted files and restored your computer back to its original working condition, reboot it and try selecting your desired boot device again from the available options.


If you’re having trouble with your computer getting to the point where it says “Reboot and select proper boot device,” follow these steps: 1. Click on Start, type msconfig in the search bar, and press Enter. 2. Once the System Configuration Utility is open, click on Boot tab and make sure that Enable boot menu selection is checked under Boot options section. 3. If you have a dual-boot setup, either check or uncheck Use default option for primary OS (Windows 8/10) in Dual Boot section as appropriate. 4. Close System Configuration Utility by pressing F5 key then OK button when finished. 5 Reboot your computer and see if the problem persists. If not, congratulations! You have successfully fixed your computer’s reboot problem!



Please enter your comment!
Please enter your name here

Most Popular

Recent Comments